The latest Citrix certification 1Y0-A28 exam practice questions and answers

When you try our part of Citrix certification 1Y0-A28 exam practice questions and answers, you can make a choice to our IT-Tests. We will be 100% providing you convenience and guarantee. Remember that making you 100% pass Citrix certification 1Y0-A28 exam is IT-Tests.

IT-Tests.com ensure that the first time you take the exam will be able to pass the exam to obtain the exam certification. Because IT-Tests.com can provide to you the highest quality analog Citrix 1Y0-A28 Exam will take you into the exam step by step. IT-Tests.com guarantee that Citrix 1Y0-A28 exam questions and answers can help you to pass the exam successfully.

IT-Tests.com is a website that can provide all information about different IT certification exam. IT-Tests.com can provide you with the best and latest exam resources. To choose IT-Tests.com you can feel at ease to prepare your Citrix 1Y0-A28 exam. Our training materials can guarantee you 100% to pass Citrix certification 1Y0-A28 exam, if not, we will give you a full refund and exam practice questions and answers will be updated quickly, but this is almost impossible to happen. IT-Tests.com can help you pass Citrix certification 1Y0-A28 exam and can also help you in the future about your work. Although there are many ways to help you achieve your purpose, selecting IT-Tests.com is your wisest choice. Having IT-Tests.com can make you spend shorter time less money and with greater confidence to pass the exam, and we also provide you with a free one-year after-sales service.

If you want to choose passing Citrix certification 1Y0-A28 exam to make yourself have a more stable position in today's competitive IT area and the professional ability become more powerful, you must have a strong expertise. And passing Citrix certification 1Y0-A28 exam is not very simple. Perhaps passing Citrix certification 1Y0-A28 exam is a stepping stone to promote yourself in the IT area, but it doesn't need to spend a lot of time and effort to review the relevant knowledge, you can choose to use our IT-Tests.com product, a training tool prepared for the IT certification exams.

Exam Code: 1Y0-A28
Exam Name: Citrix (Implementing NetScaler 10 for Networking and Traffic Optimization)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 123 Questions and Answers
Last Update: 2013-11-27

1Y0-A28 (Implementing NetScaler 10 for Networking and Traffic Optimization) Free Demo Download: http://www.it-tests.com/1Y0-A28.html

NO.1 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C

Citrix   1Y0-A28   1Y0-A28 demo   1Y0-A28

NO.2 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B

Citrix   1Y0-A28   1Y0-A28 test questions   1Y0-A28 exam
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix certification   1Y0-A28 exam dumps   1Y0-A28
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix answers real questions   1Y0-A28 study guide   1Y0-A28 study guide   1Y0-A28   1Y0-A28 pdf
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix original questions   1Y0-A28   1Y0-A28 braindump
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

Citrix questions   1Y0-A28   1Y0-A28 test questions   1Y0-A28 exam simulations
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B

Citrix   1Y0-A28 exam prep   1Y0-A28 questions   1Y0-A28 exam   1Y0-A28
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C

Citrix dumps   1Y0-A28 study guide   1Y0-A28 answers real questions
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix practice test   1Y0-A28   1Y0-A28

NO.3 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B

Citrix certification   1Y0-A28 test answers   1Y0-A28 braindump   1Y0-A28

NO.4 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix test   1Y0-A28   1Y0-A28 certification   1Y0-A28

NO.5 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B

Citrix demo   1Y0-A28   1Y0-A28   1Y0-A28   1Y0-A28 dumps

IT-Tests.com offer the latest MB2-866 Questions & Answers and high-quality C_TADM53_70 PDF Practice Test. Our HP2-W100 VCE testing engine and 000-619 study guide can help you pass the real exam. High-quality 1Z0-511 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/1Y0-A28.html